The following points should be noted during the use and transportation of film-coated boards:
Precautions during transportation:
Try to avoid transportation in rainy and snowy weather to prevent the film-coated boards from getting damp or damaged.
When loading, place them neatly and tie them tightly to prevent collisions.
Use an integral trailer for shipment, align the pads between the boards up and down to avoid sitting.
Warehouse management:
The film-coated boards should be placed in a well-ventilated place to avoid direct contact with the ground, and use wooden square bottom drags for isolation.
The film-coated boards should be covered to prevent exposure to the sun and rain to accelerate aging.
When storing, the two templates should be placed in a way that the board surfaces are opposite to each other to prevent tipping.
Precautions during construction:
Pay attention to the fixation of embedded parts and reserved holes during installation to ensure firm installation.
Select appropriate water reducer according to seasonal temperature differences to ensure the quality of concrete pouring.
When cutting, use alloy saw blades with more than 100 teeth and sawing machines with tracks to avoid breakage on the back of the template.
Construction tips:
The joints should not be too tight to avoid leakage affecting the quality.
After installation, water can be poured on the film-covered board to make the joints more harmonious.
